BOXED PRECISION PIN SETS
Pins are hardened to Rc 58 to 62 and finish lapped to Ra=0.03µm. Each
gauge is electro-etched with its size for ease of identification except pins
below Ø1.55mm, which are always supplied in specially marked plastic
containers.
Popular sets are as shown in the tables.
Special set builds and a full range of inch
series are also available on short lead-times.
Each high precision pin set is supplied complete with a polished wooden case.
CGPS-M SERIES
This series is supplied as a PLUS tolerance or MINUS tolerance set, as follows:-
PLUS Set –
nominal size plus 2µm to plus 5µm except 07M (1µm to 5µm)
MINUS Set –
nominal size minus 2µm to minus 5µm except 07M (1µm to 5µm)
Roundness Geometry – better than 1.5µm
Pin Dia Length
0.10 to 0.15mm 20mm
0.16 to 0.29mm 30mm
0.30 to 1.525mm 40mm
Over 1.525mm 50mm
Pins above 1.525mm are free-standing
in the box.
| CPGS - M SERIES | |||
| Set No. | Size Range |
Steps | No. Pins |
| CGPS01M | 0.100-0.290MM | 0.1MM | 20 |
| CGPS02M | 0.300-1.525MM | 0.025MM | 50 |
| CGPS03M | 1.550-6.275MM | 0.025MM | 190 |
| CGPS04M | 6.300-9.775MM | 0.025MM | 140 |
| CGPS05M | 9.800-12.525MM | 0.025MM | 110 |
| CGPS06M | 12.550-12.975MM | 0.025MM | 18 |
| CGPS07M | 13.000-19.000MM | 0.1MM | 61 |
U and M sets are supplied with a unilateral tolerance applied
either plus or minus as required.
| CGPS - U SERIES | ||
| Set No. | Size Range (0.01mm STEPS) |
No of Pins |
| CGPS 01U | 0.20-0.50mm | 31 |
| CGPS 02U | 0.50-1.00mm | 51 |
| CGPS 03U | 1.00-1.50mm | 51 |
| CGPS 04U | 1.50-2.00mm | 51 |
| CGPS 05U | 2.00-2.50mm | 51 |
| CGPS 06U | 2.50-3.00mm | 51 |
| CGPS 07U | 3.00-3.50mm | 51 |
| CGPS 08U | 3.50-4.00mm | 51 |
| CGPS 09U | 4.00-4.50mm | 51 |
| CGPS 10U | 4.50-5.00mm | 51 |
| CGPS 11U | 5.00-5.50mm | 51 |
| CGPS 12U | 5.50-6.00mm | 51 |
| CGPS 13U | 6.00-6.50mm | 51 |
| CGPS 14U | 6.50-7.00mm | 51 |
| CGPS 15U | 7.00-7.50mm | 51 |
| CGPS 16U | 7.50-8.00mm | 51 |
| CGPS 17U | 8.00-8.50mm | 51 |
| CGPS 18U | 8.50-9.00mm | 51 |
| CGPS 19U | 9.00-9.50mm | 51 |
| CGPS 20U | 9.50-10.00mm | 51 |
| CGPS 21U | 10.00-10.50mm | 51 |
| CGPS 22U | 10.50-11.00mm | 51 |
| CGPS 23U | 11.00-11.50mm | 51 |
| CGPS 24U | 11.50-12.00mm | 51 |
| CGPS 25U | 12.00-12.50mm | 51 |
| CGPS 26U | 12.50-13.00mm | 51 |
UKAS Certificates are available for all set builds.
